Invision Dual PC Monitor Arm Bracket Ergonomic Height Adjustable (Gas Assisted) Full Motion Long Arm Desktop Clamp Mount for 24”-35” Screens Tilt & Swivel VESA 75mm & 100mm Weight 2kg to 15kg (MX900)

Sturdy and well designed monitor arms
These are my second set of invision monitor arms, after previously having the MX300’s which started to show signs of wear after more than 5 years. I purchased these as they allow heavier screens so should be more durable.These were very easy to setup with easy to follow instructions. The adjustment ability is really good and the cable management holes are great too. The screens do sit slightly further forward than the previous arms as the arms are a bit chunkier, but it works well for me.Just be careful when mounting your screens as the gas struts are quite powerful even on their factory setting!

Affordable and reliable monitor stand
The monitor stand came well packaged and had all of the necessary equipment, both types of stands come in the box (clamp and screw option).The monitor arms are made of a glossy metal material with some cheap plastics for cable management. The arms are very strong and I bought the arms to be slightly stronger than required, just to be sure they would hold my two monitors. The plastic parts were not perfectly manufactured as one of the plastic cable holders was slightly warped and did not attach securely to the metallic arm.The assembly is clear as long as you take your time and follow the instructions. There are two USB cables that become ports under the monitor stand, they can be removed easily but I decided to keep them on in the end. I could not use a hard drive plugged into the stand with the blue cable plugged into the back of my PC. I think the USB cables are an older generation and are not of a high rating. I found the USB cables did not charge devices quickly, and I don’t really use them now.The arms came on the tightest setting and I assembled them without changing the tightness of the piston. I found that it was actually very difficult to push the arm down initially to adjust the tightness of the arm. I gave the arm about 20 turns to loosen the arm, the monitor arms are still quite stiff although I think I can loosen them further.The arms work effectively and the cable management worked for up to three cables per arm. I can also rotate my monitors to 90 degrees and I like that feature very much.Overall the product does exactly what it says and us exactly what I needed it for. The USB ports in my opinion are an unnecessary feature but some people may find use in them.

Fantastic bit of kit.
Got the twin arm (up to 35inch monitor) and arrived in the box. One needs to assemble this unit. The base unit has 2 clamps (some only 1) which certainly helps if one has all round access to table etc. The arms are made out of Aluminium with plastic cable units which are good and tight, but can be removed for the cable transport. The VESA mounts are 75 and 100, so should fit my monitors.They are extremely well made, should last a long time.Only two gripes, first is the + and – marks for the tension of the arms and monitor, being black the same colour as the units, extremely difficult to see. Second is the instruction booklet for the assembly of the unit, a bit small, which means that the writing is even smaller, making it extremely difficult to read (even with my reading glasses on) they do supply via email a PDF copy which one can use to assemble the unit.Possibly include a direct link to the PDF would help.Would I buy this item again, YES I would.Would I recommend this to anyone, Yes I would even with the niggles, it seems to be a fantastic bit of equipment.Hope this helps.

Easy assembly and set up, feels very sturdy, and does what it is supposed to. No complaints after 2 weeks in action. The set-up instructions are detailed and clear (thanks for the note of up to 22 revolutions to release the tension).

Molto soddisfatto dell’acquisto, a partire dalla consegna: il corriere mi ha telefonato per sapere se ero a casa e un minuto dopo mi ha consegnato il pacco, Amazon consegna anche di domenica… :-)Inizialmente volevo prendere il modello a braccio singolo, ma poi ho optato per questo a due braccia in previsione di un acquisto di un secondo monitor, nel frattempo ci ho installato un 34 pollici da circa 8 kg. e intendo utilizzare il braccio libero montandoci un vassoio che possa portare il mio notebook.Ho trovato molto facile il montaggio e le successive regolazioni grazie ad un libretto istruzioni ben fatto.Una volta montato è anche bello da vedere e l’impressione è di robustezza; le brugole per le regolazioni, una volta montato il monitor, vanno allentate un bel po’, altrimenti né il braccio, né la piastra non si smuovono di un millimetro.Mi è piaciuto particolarmente il sistema adottato per nascondere i cavi, ma prestate attenzione ad avere cavi abbastanza lunghi e a sistemarli in maniera corretta, provando anche a muovere il monitor in diverse posizioni osservando da dietro che i cavi non vengano stressati da torsioni o allungamenti impropri, ad esempio se ruoto il monitor in verticale in senso orario non ho problemi, ma se lo ruoto in senso antiorario mi si scollega il cavo della Display Port…Ho visto da altre recensioni che alcuni modelli presentano una o addirittura due porte USB sul frontale della basetta, il mio ne è privo, ma non mi importa perché tanto intendo piazzarci una mensola doppia davanti, quindi non è un problema: se ci fossero state le avrei ovviamente utilizzate, ma non è per quelle prese USB che ho scelto questo prodotto.