Cable Matters Short RCA Splitter Cable 1 Male to 2 Male – 1.8m, RCA Y Splitter for Subwoofer, Speaker, Audio System or Home Theater

Decent quality branded cable that works perfectly well
Nothing wrong with this cable, it does exactly what you expect it to do. Namely take a single phono output and split it to two phono inputs. Although the plugs are colour-coded red and black, naturally you’re only splitting a mono output so you aren’t going to get anything different on either channel. It takes a single mono output and delivers it to two mono inputs with no noticeable distortion or reduction in volume. For just under a tenner, it’s a decent quality branded cable that works perfectly well.

Ever-useful RCA Y adaptor
A very decent, affordable male – male RCA Y adaptor. While it might seem an esoteric piece of kit, it’s highly likely that at some point, if you’re altering home audio or home theatre kit, you’ll find a need for just such an item (I have many times in the past) so even if you don’t require one now, it’s a useful item to have on-stock -especially since at £8,.99 [April ’25] it costs very little.Supplied in a simple flat cardboard box, for the minimal asking price it’s a nicely enough made item: decently molded low-mass, plated plugs, a reasonably flexible and sufficiently long lead / leads for most requirements, with what seems to be an effective outer shield / nominal return. It’s relatively unobtrusive too, rather than being of python-proportions. Well worth the money.

Das RCA-Splitterkabel von Cable Matters überzeugt durch eine durchdachte Kombination aus hochwertiger Verarbeitung, vielseitiger Einsetzbarkeit und zuverlässiger Leistung. Es eignet sich ideal, um ein einzelnes Audiosignal auf zwei Geräte – etwa Subwoofer oder Verstärker – aufzuteilen und ist besonders praktisch bei Heimkinosystemen oder beim Anschluss älterer Audiogeräte. Ich habe es für den Subwoofer eingesetzt und bin mit der Leistung zufrieden.Die Audioqualität ist hervorragend: Dank guten Qualität und Abschirmung bleibt das Signal klar und störungsfrei – ideal für Musikliebhaber und Heimkino-Enthusiasten, die auf sauberen Klang Wert legen. Der stabile Sitz der Stecker sorgt zudem für eine sichere Verbindung ohne Wackelkontakte.Mit einer Länge von 1,8 Metern bietet das Kabel genug Spielraum für flexible Installationen. Die Kompatibilität mit gängigen AV-Receivern, Subwoofern und Soundsystemen macht es zu einem universellen Helfer in jeder Audio-Umgebung.Fazit: Ein zuverlässiges, gut verarbeitetes Cinch-Splitterkabel, das hält, was es verspricht – inklusive lebenslanger Garantie als Bonus. Klare Kaufempfehlung für alle, die ihr Audio-Setup unkompliziert erweitern möchten.

I purchased this splitter cable to experiment with the “Out-of-Phase Stereo” effect, sometimes called the “OOPS” effect. (Yeah, I know I still need something to reverse the phase of one of the channels, I’m working on that!) I think this cable will serve my purposes well, since it’s well-constructed, and the connectors are of good quality.I tested it first with an ohm meter to make sure it’s been wired correctly, and it has been. Then I tried it out with an audio source, first to combine the left and right channels into a single channel, and that worked fine. Then I used it to take a single channel of a stereo source and split it into the left and right inputs of the amplifier. That worked fine as well.The sound quality was just fine. It was indistinguishable from the cabling I’m already using on the system.So in other words, I used this cable not just as a “splitter”, as it’s called in the title, but as a “combiner” as well, and it works for both cases.Is it a good value for the money? Well, you can get shorter cables to do the same job for less money. (These are usually called “Y” cables.) But if you require a cable of this length for a particular application, then this cable would be a good value for the money.

I needed an RCA Y-adapter for my audio cable kit for those times when I need to adapt a mono source to a stereo input, and vice versa. I’ve used Cable Matters products before and felt secure ordering their splitter cable.The Cable Matters Splitter Cable came in a cardboard box. The wiring is two 1/8” cables molded together like lamp zip cord. The 6-ft long cable can be bent to a 3/8” radius. The connector shells are metal and the connectors are gold-plated. The left and right channels are identified by colored strain reliefs, though for a stereo-to-mono adapter cable, channels are moot. The connectors are a bit longer than average, so I’d recommend having at least 2.5 inches of clearance to plug them in.I tested the cable for noise by plugging it by itself into a line-input of my mixer and setting the gain at maximum. Unlike some of the lower quality cables I have reviewed recently, as I expected the Cable Matters cable was totally noise-free, even when held along a power cable. The connections were secure and free of static when moved.