Meross Smart Light Switch Module, DIY Wall Switch Module, Wireless Relay Smart Switch works with Apple HomeKit, Alexa, Google, Remote and Voice Control, No Hub Required, 2.4GHz, 10A, 2 Pack

If you have more than just iPhone they could be a great find
These switches are great for the price—easy to set up and simple to use. Anyone invested in the Apple ecosystem will truly appreciate how well they integrate and perform.

Simple
Great product very easy set up and wire can be used for a variety of items I use it to switch on underfloor heating pump Took all of 10 minutes to setup and wire added to app then apple home kit no problems

Doesn’t work, won’t connect
The first one of these I bought connected quite fast and worked for a few hours, then it dropped out and needed to be reconnected, I did this and it again worked for an hour or so. Then it dropped out again and wouldn’t reconnect at all so I got Amazon to send a replacement, this one won’t do anything, HomeKit can’t find it, the terrible Meross app can’t find it, it just sits there with a light which is sometimes green, sometimes green/orange, sometimes flashing green. It’s going to be sent back and I will figure out something else to use that isn’t made by Meross.The physical connections on this are very flimsy as well and don’t seem to be attached to the circuit board very securely, maybe they don’t bother as nobody keeps them long enough for those to break?There are a number of people on forums suggesting lots of strange techniques for connecting these but none of them worked for me, the amount of people saying they can’t connect it and saying to stay away from Meross stuff should have also been a warning to me as well. Anyway, back if goes.

Easy enough to integrate into HomeKit, difficult to connect to Meross app
TLDR; Thankfully HomeKit has automation, because this switch simply refuses to connect to the Meross app.I’ve got a couple of Meross products, and they work great in HomeKit but they’re always a pain to get into the Meross app. This switch is even worse for that aspect.Eventually got HomeKit on, via HomeKit (and in future attempts, just adding straight via HomeKit was the easiest way forward). This left the device as unbound in app. Couldn’t add it, it said wait 1min but after several it was offline and broke HomeKit. Had to remove and repeat HomeKit setup.After several attempts, tried a tweak, which was set up HomeKit.,Then use a different iOS device to set up in meross app. Left that for about 15m which didn’t seem to do anything, but the first iOS device could now see it, and could do firmware update. But the firmware update was a 1-shot, I’ve never been able to get the switch to show up in the Meross app ever again.Crimp connectors are tiny, feel undersized for a 10am rating. Stickers covered the important wiring guide, so didn’t know it had to be wired in a certain direction at first. The manual shows the in/out -> but when they’re covered on the switch itself it looks like you can wire it up in any direction (which you can’t).Firmware update takes way longer than their estimate but as mentioned I’ve never been able to get the switch into their app ever again to look for newer firmware updates.This will probably be my last Meross purchase because it’s deeply frustrating setting them up.

Habe mehrere Produkt von Meross im Einsatz und dieser WLAN Switch MS710 wird zum smarten Einschalten meines 5 M LED Stripe mit Apple HomeKit benutzt.Leider ist er nach 12 Monaten defekt… kein Muks mehr. Nach Komtakt mit Meross, sollte ich ein Ticket aufmachen und dort alles mit Foto bzw. Videobeweis dokumentieren. Hab ich alles gemacht und am nächsten Tag gab es eine Anrwort, das mein defektes Gerät ersetzt wird. Super Support Meross, Danke!!Ich habe denselben Switch auch nochmal seit 2022 an einer Spiegelkugel im Einsatz, bisher ohne Probleme.Die Kabelanschlüsse finde ich wie in anderen Rezensionen auch sehr klein, aber einmal gemacht… fässt man das ja nicht mehr an. Ich bin zufrieden mit dem Produkt und auch mit dem Service von Meross

Funkar bra!