Network Cable Tester with Optical Power Meter PoE Multi-Function, Wire Tracker RJ11 RJ45 LAN Cable Toner Cat5 Cat6 Ethernet Cable Tracer with NCV, Port Flash, Support Type-C Charging, B
Original price was: £97.00.£90.00Current price is: £90.00.
Price: £97.00 - £90.00
(as of Jun 15, 2025 12:22:10 UTC – Details)
Product Description
What Can You Get？ Package Included: 1x Transmitter 1x Receiver 1x RJ11 interface telephone 1x RJ11 alligator clip cable 1x Type-C charging cable 1x Carring Bag Anti-jamming probe
With its strong anti-jamming ability, it can find targets quickly and accurately in a large number of cables.
New Upgraded Network Cable Tester with Optical Power Meter Anti-interference Network Cable Tester
Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance
Optical power Meter Test & Port Flashing
Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port.
15000mah 3.7V Lithium Battery
Built-in rechargeable battery. Running time of 10 hours, Type-C charging is more convenient.
VFL Function
RJ11 RJ45 Ethernet Cable Tester with VFL Function and POE Tester
LED Lighting
Help you to scan the cables clearly in the dark room.
Network Cable Tester with POE, Wire Tracer with Cable Length Test, Port Flash…
Add To Basket
Add To Basket
Add To Basket
Add To Basket
Price
£59.00£59.00 £52.99£52.99 £59.99£59.99 £52.99£52.99
— no data
Model
NF-818L NF-8509 NF-518S NF-8209 NF-8209S
Multi-function Detection: The combination of Network Cable Tester and Optical Power Meter, very sturdy and compact for storing. A larger backlit LCD display, the results are more visible!
Wire Tracker & Cables Verifying: ①Support RJ45/network cable testing，suitable for the Cat5, Cat6 Ethernet Cable ②There are three scan modes: anti-interference mode, the normal hunting mode and POE mode can be switched③ Measure cable length accurately , the range is 200m④Port flashing function, so that there is one more way to find the line
Fiber Optic Cable Tester: FC/SC/ST and other interfaces are universal and support the test of different wavelengths of the red light source (650nm) and optical power/light source (850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm); Optical fiber fault detection, optical fiber breakpoint location, optical transmitter power measurement (dBm and W), optical fiber line loss test
NCV Induction Pen: NCV non-contact voltage measurement, Built-in highly sensitive voltage probe, the screen displays the signal strength.
Long Battery Life + Type-C Charging: Built-in 1500mah 3.7V lithium battery, running time of 10 hours, Type-C charging is more convenient. The flashlight solves the trouble of working in the dark
Customers say
Customers find the cable tester to be well worth the money and appreciate its functionality, working straight out of the box with perfect test ability. They praise its build quality, ease of use, and cable tracking capabilities, with one customer noting it’s the most accurate tone tracer for bunched cables. The device receives mixed feedback regarding speed, with some customers finding it quick to provide output while others report slow response times. Customers disagree on the length measurement feature.
11 reviews for Network Cable Tester with Optical Power Meter PoE Multi-Function, Wire Tracker RJ11 RJ45 LAN Cable Toner Cat5 Cat6 Ethernet Cable Tracer with NCV, Port Flash, Support Type-C Charging, B
Add a review
Related Products
Original price was: £97.00.£90.00Current price is: £90.00.
Josh –
Great value for money
Great features for the price point.Of course there are better tools out there but nothing in this price range has the same feature set!There are reviews knocking it for missing features, and comparing it to Fluke and the like, but you must realise the enormous price difference.Pros:Easy to useSaves carrying multiple tools (VFL, network cable tester, toner)Feels like acceptable qualityBattery life is good.Features all seem to work as expected. Length measurement is accurate give or take a couple of metres.Cons:Itâs quite huge. Uses up a lot of space in a backpack!The receiver unit seems to turn on very easily. Multiple times Iâve got it out my bag and the receiver unit is on and gone flat.No alternative fibre connection options. The screw on adaptors are for SC, unscrewing these allows you to insert an ST, but an adaptor for LC would be a great addition.
Mike Pemberton –
Quick and easy verification of cables in a budget package
I was hesitant getting this as the cost difference between it and ‘pro’ tools was significant so I wondered what the catch was. I’m very glad I bought it as it’s been a real life saver primarily for checking fibre runs at a multicampus site I manage, which has a spiders web of fibres of all sorts of types and quality. Often we had to resort to getting a 3rd party out to check the fibres which caused delays and was expensive, especially as we just wanted to verify if we could get a light down it for a later project.The tester allows me to test both single and multimode fibre patch cables and longer runs in the range of kms. This is a basic dBm reading, but is plenty for me. It does require a device on the send side to push light down, so a switch with an SFP is required for me to test a long run and verify the light is coming to the remote site. It does however have a basic red LED / laser light it can push down, but if you want to test the full run you’ll either need to loop it back or have a second unit on the other side.If using for the fibre checking you will want some patch cables, SC at the tester end to various ends and of single & multi mode for the other end (unless your site uses a consistent connector type)I’ve not really used the other functions much, but the toner does work fine as do the copper cabling test tools. PoE checking is handy too.What it doesn’t do, and I really wish it did, is CDP / LLDP on the copper port.Battery life is brilliant. I’ve not charged it since I bought it a year ago.A great tool for quick validation of links and cables which can be thrown in a bag for each technician while the bigger / expensive ‘pool’ tool stays in the office for fallback.
Carlotta –
Low cost, but works OK
For the price this isn’t a bad bit of kit. I comnpared the results of an optical test on this, with a professional OTDR costing a great deal more. I was quite surprised how close they were, merely 0.5dB difference in received signal strength. Note that all fibre ends were thoroughly cleaned before conducting the tests.The Ethernet tests are equally decent. Again, perhaps not up to the spec of high end expensive kit, but what do you expect for the price. The unit performs all the tests it claims it can, and is very useful overall. The tracer is a little lacking though as it is not selective enough, but can still help to narrow down to a few cables in a bunch.Would I have another? Actually yes I would, based purely on the cost. If I were to lose one of these, I’d be annoyed, whereas if I lost one costing more than 10 times the price as many professional units are, I’d be utterly devastated, and well out of pocket
Reece –
A technician’s Swiss Army knife
I’ve not had this for long but I know this is going to be an invaluable tool for my work around the office I provide support for. Already, I’ve used it for continuity testing to verify RJ-45 terminations, length measurement, verifying the PoE capabilities of ports in floorboxes, and toner-and-probe location. I can’t say I’ve used the fibre functions yet, but I imagine those will eventually come in handy too. The carry case is great, and it was nice to see a few extras thrown in, including various test leads and some earphones (“Dirtybuds” to the highest degree, but they don’t need to be anything else, they’re just for tone testing!)It’s no Fluke – I can’t imagine all of the readings will be 100% accurate all the time, but for my work they don’t have to be, and for the price I think this is a wonderful unit that will serve me well for a long time. My one gripe is that the battery appears to be some internal Li-ion battery that, while rechargeable, will surely need replacing a few years down the line. Not sure if it’s an easily replaceable part or not. Regardless, if you’re just starting out as a tech and need a good multifunctional tool for testing network cables, I’d recommend this one for sure!
Slash –
Better than the cheap network testers.
Excellent value for money.
Stuart jackson –
Fantastic
Brilliant product. Works effortlessly and has already saved many problems
Jacob K –
Good stuff, makes a job waaay easier
Rodolfo –
il prodotto e arrivato difettoso .
Thomas Krenzer –
Gute Ware zum günstigsten Preis
Lubos Otapka –
Wird man 2mal messen, krieg 2mal verschiedene Resultate. Kabel mit Schild kann man naturlich nicht nachfolgen, aber leider auch stecker konnte nicht identifiziert, ob Antenna/Finger zu Gross ist in RJ45 reinpassen.
BERNERSON KJELL-Ã KE –
Nice device that does its job.