NOYAFA NF-468S Network Cable Tester, Cable Mapper, POE Tester, Ethernet Cable Continuity Tester -RJ45/RJ11/CAT5/CAT6/CAT5E/CAT6A, Telephone Line CAT3

Price: £23.99 - £20.39
(as of Aug 28, 2025 18:37:55 UTC – Details)

Product Description

RJ45 RJ11 Port

The displays on Master and Remote match exactly, so you can check the connection at both ends.

Ethernet Cable Tester

Measures the continuity of the cable. LEDs go through one after the other. Cable is wired correctly.

Measurements of telephone line

Measurement of continuity of telephone lines. It can be used to test cables directly in PoE/Router/PC etc. when turned on.

Contains battery

The package comes with 1 9v polymer battery you need, install the battery and start testing in minutes.

Host and Remote: NF-468S network cable tester is used to detect short circuits, open circuits and crosspoint wiring errors on wired lines, hosts and remote ends.
POE Function: NOYAFA ethernet cable tester can test 60V power supply, quickly determine the power supply type and status of the POE switch, and prompt the battery power and voltage to be low, and the LED light can visually display the results.
QC Function: NOYAFA ethernet tester quickly tests network cables for open, crossover, through and short circuit results, quickly detects crystal head crimps, and can also measure special shielded network cables (UTP/STP).
Applicable Cable Types: NF-468S wire tracer is suitable for RJ45 CAT5, CAT5E, CAT6, CAT6A, RJ11, RJ12 Telephone Line CAT3 (6P2C/6P4C/6P6C) POE Test/ Router Conversion.
Scope of application: NOYAFA NF-468S network tester, RJ45 network cable tester supports two standards: 802.3af and 802.3at. It is easy to use, newly upgraded and can be used in households, industry and other fields. (Note: This device cannot be charged and tested Network cable and telephone cable, otherwise the device will be seriously burned)