FLUKE networks LinkIQ Cable+Network Tester, LIQ-100, Yellow
Original price was: £2,650.80.£2,572.97Current price is: £2,572.97.
Price: £2,650.80 - £2,572.97
(as of Oct 18, 2025 00:27:51 UTC – Details)
From the manufacturer
We reliably equip professionals with the best certification, troubleshooting and installation tools to install and maintain critical network cabling infrastructure for our connected world.
LinkIQ Cable + Network Tester
Cable Testing You Trust. Network Testing You Need.
The LinkIQ Cable+Network Tester validates cable performance up to 10GBASE-T via frequency-based measurements. The LinkIQ also provides nearest switch diagnostics including advertised data rate, switch name, port number, and VLAN information, plus Power over Ethernet testing through Hardware/Software negotiation and loaded Voltage (V) and Power (W) tests.
Cable Performance testing up to 10GBASE-T via frequency-based measurements Network features including: Nearest Switch Diagnostics including advertised data rate, switch name and port number, and VLAN PoE Verification – Detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch Displays cable length, wire map, and distance to open or short Manage results and print reports from LinkWare PC
Key Features
Cable Commissioning
Frequency based measurements that commissions the cable to support Ethernet data rates from 10BASE-T to 10GBASE-T.
Power Over Ethernet
Negotiates with power supply to determine Type and PoE Class (0-8). Reports Advertised Power and measures actual power available via load test.
Network Testing
Communicates with the Network equipment to find Name, Port Number, VLAN, and available network speeds.
Add To Basket
Add To Basket
Customer Reviews
4.4 out of 5 stars 78
4.3 out of 5 stars 108
4.4 out of 5 stars 151
—
Price
£2,572.97£2,572.97 £1,189.00£1,189.00
— no data
— no data
Certify to International standards
no data
no data
no data
✓
Parametric tests on cable and connectors
Measures: NEXT, RL, IL no data
Measures Crosstalk and Impedance Full Parametric bi-directional test
PoE Test
PoE Class (0-8), Pegotiated Power, Power Load Test Negotiated Class (0-8) and Power Identifies Presence of voltage between pairs Resistance Balance Test
Wire Map, continuity length, and tone generation
✓
✓
✓
✓
Documentation
1000 results in tester, Document with LinkWare PC no data
250 results in tester , Documents with CableIQ Reporter Software 12,000+ Copper Results in tester Document with LinkWare PC & LinkWare Live
Network Test Capabilities
Network Speed (up to 10Gb/s) Network Speed (up to 10Gb/s) Network Speed up to 1000Mb/s no data
User Interface/Display
Color Touch Screen Monochrome Monochrome Color Touch Screen
Cable Performance testing up to 10GBASE-T via frequency-based measurements
Network features including: Nearest Switch Diagnostics including advertised data rate, switch name and port number, and VLAN
PoE Verification – Detects the PoE class (1-8) and power & performs a load test of available PoE from the connected switch
Displays cable length, wire map, and distance to open or short
5 reviews for FLUKE networks LinkIQ Cable+Network Tester, LIQ-100, Yellow
Add a review
Related Products
Original price was: £2,650.80.£2,572.97Current price is: £2,572.97.
John Robertson –
We use the LIQ for training. Compared to its peers, it’s my current favorite Cat cable tester for 5, 5e, 6 and 6A. I’ve included a photo of the TDR and wire-map functions, versus a Viavi ONX-580 OneExpert (a completely different device, but comparable for this test).If you need verifiable crosstalk measurements (near-end, far-end, power sum, etc.), or Cat 7 or 8 testing, then you’ll have to get into the Fluke Versiv mainframe, like a DSX-8000, which is several times more expensive. However, for easy and simple qualification testing up to 10G, the Link IQ is superb. The single pushbutton test might mislead some that the unit cannot be customized for testing, as it did me when considering the device, but you can set-up virtually all key test parameters (shield or no-shield is an important one, for example). This requires a menu-dive, but I felt these were quick, simple, and intuitive. By the way, I’m sure the meter does perform basic crosstalk checks to qualify up to 10G, but you cannot directly see the results, as you would with more expensive certification devices, like the Fluke Versiv DTX (older) and DSX (newer) series.The LIQ is light to carry, charges very quickly, and is reasonably well protected, although I wouldn’t want it to hit the floor with too much velocity (but you won’t do that…). The single included remote (ID #1), Cat 6A test cable, and worldwide power adapter kit, are all welcome accessories in the kit. Larger projects would benefit from you purchasing additional remote ID’s, but the single remote will go a long way to help with small and even medium size wire-mapping jobs. We are very happy with the purchase.
Wolfgang Burkhard –
Super Gerät zum professionellen Messen von Netzwerken. Ich verwende den LIQ-100 fast jeden Tag. Top Gerät und einfach zu bedienen!
Durilec –
je n’ai pas pour habitude de faire un commentaire mais au vue de la qualité du produit je suis obligé, impressionant ,outil de qualité , alors oui il existe des appareils moins cher mais un Fluke reste un Fluke et il n’y a rien de semblable
Stefan –
Ein wunderbares Gerät was durch das Farbdisplay kaum Wünsche offen lässt.
jeff t1 –
We built a several hundred sq mile gigabit WiFi network in the Western desert. Don’t know how we managed without this type of device to check our Network cabling to back-haul microwaves. Simple to operate from intuitive menu. The junior tech opened the box in the truck as we headed into the deserts. In moments we answered many networking questions in what most network jocks would call seriously adverse environments. In our application it paid for itself in a matter of hours because it identified sketchy network cable issues vs purchase & chg-out of costly microwave gear. Will update you in a year.