10 Port Gigabit PoE Switch, 8 Ports Gigabit PoE+ & 2 Gigabit Uplink Ports, Total Power 120W 802.3af/at, Metal Casing Plug and Play Fanless Unmanaged

Orange is 2.5GB connection. Both worked fine. 3rd 1GB is Internet
Working exactly as described. My 2 x 2.5GB devices worked immediately and file transfers at constant 283MB a second. For the price that’s excellent !!

KeepLink KP-9000-6XHML-X2 4x 2.5Gbe RJ45 ports 2x 10Gbe SFP+ ports
So far working well, only real let down is the management software is not pretty has most settings though. For the price it’s good I bought 3 plus another manufacturer equivalent to form a 10Gbe backbone on my network and so far it working.

A tidy little 2.5Gb desktop switch
I bought the 5 port version, after I bought the NiPoGi AMD Ryzen Mini PC, with both 1Gb & 2.5Gb interfaces. I wanted to take advantage of the faster networking. I needed 5 connections, 1 each for my 2 desktop PCs, 1 for the NiPoGi, 1 for my laptop dock and 1 to connect to the rest of my network.When I replaced the 1Gb switch I discovered that my 2 desktop PCs also had 2.5Gb networking! The only slow device was my 2023 MacBook Air’s dock which only supports 1Gb. I was using CAT 5E cabling throughout with no issues.As a test I bought a twin pack of QSFPTEK 10GBASE-T SFP+ to RJ45 modules (currently £72) to just see. They connected at 10Gb from the SFP+ port on this switch, to another (different make and much more expensive) switch. I later swapped the 2 patch leads in the chain for CAT 6, but the wires in the walls are CAT 5E! I realise that this configuration is out of specification, so I’m lucky it works. I now have a spare 2.5Gb port available 🙂

Poor experience – certainly not enterprise (as labelled)
Sure they’re cheap, nothing else out there offering 2.5GB connectivity for the price except other China switches. I purchased two for home use and yes, I work in IT, these were for a speed boost and virtualization lab usage.One switch didn’t power up properly (flashing LED’s), back in the box.The other did start, connected to Web interface (need to change language every time), set new admin password and it refused to log me in. Reset the switch and logged in with defaults. Tried to change IP from the default which also failed. Also, as soon as you pull the power to these switches, they loose all config changes so there’s evidently no redundancy memory installed. I tried locating support or a website perhaps for firmware updates and there’s nothing. AI suggested NICGIGA as perhaps rebranded who have a website and firmware but left it well alone.Both switches returned. Look if you’re simply using as a base switch for up to 2.5GB speeds they would be fine, nothing changed (even the default credentials), use their IP but hardly any point if at power loss or reconnect there’s no saved config. Maybe if they offered a support site with updates that would be something. Could have been two faulty switches, perhaps.All the best.

Using this to insert power for my poe cameras in my shopbafter a long distance span from the router works great and a bargain of a price point

Avendo un media server e un Computer entrambi con rete a 2.5gb e una sola porta LAN da 2.5gb sul mio router, avevo bisogno di uno switch che mi permettesse la comunicazione alla massima velocità tra i due dispositivi.La configurazione è praticamente inesistente..basta attaccare il cavo lan sul router alla porta lan 2.5gb e l’altro capo a una delle porte lan link dello switch ( praticamente una qualunque qualunque ). Il gioco è fatto, basterà collegare i dispositivi con scheda di rete compatibile alla 2.5gb alle restanti porte lan dello switch. ATTENZIONE I CAVI DEVONO ESSERE CAT6 o SUPERIORI, il CAT5e non basta, non va oltre 1gbps.Sono passato dai 114/115 MBytes/s ( 1gbps ) ai 287/288Mbytes/s ( 2.5gbps ) in trasferimento dati, diminuendo del 150% i tempi di trasferimento. Per quanto mi riguarda una mano santa, per trasfermimento di file da 100/200GB mi fa risparmiare un tantissimo tempo.Domani lo metterò bene bene sotto stress in quanto devo trasferire 8TB di dati, ma per ora con molteplici trasferimenti , non ha dato nessun segno di cedimento.Inoltre il PC è anche da gaming, e per chi fosse preoccupato per quanto riguarda l’aumento del ping, andate tranquilli, gioco a Valorant mentre 5/6 persone sono collegate al media server con una banda media di 40/70mbps a persona.Giusto per info per i meno informati/infognati sull’argomento, la porta SFP+ 10gb nella mia situazione è completamente inutilizzata, quindi non preoccupatevi non è necessaria, è un plus che potrà tornarvi utile in futuro.Per ora mi sento molto soddisfatto, e consiglio il prodotto.

３カメラで、３ポート必要で、予備用ポート１箇所PoE給電能力が比較的大きなこちら良いと、設置業者さんのオススメで購入問題なく使えています、安価で買えてよかったす