Aairhut Thermal Pads 13W/mK, 85 x 45 x 0.5mm Silicone Cooling Heatsink Thermal Pad GPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop/CPU/LED

£6.59

Added to wishlistRemoved from wishlist 0
Add to compare


Price: £6.59
(as of Jun 08, 2025 00:19:17 UTC – Details)

Product Description

Thermal padsThermal pads

gpu thermal padgpu thermal pad

thermal pad 2mmthermal pad 2mm

cpu thermal padcpu thermal pad

Cool in Seconds — With a thermal conductivity of 13W/mK, our thermal pad greatly improves heat transfer between the electronic elements and effectively cool the temperature down in seconds. It also provides insulation, shock absorption, extra sealing and protection for your electronic elements
Easy to Use — 85 x 45mm with slightly sticky on dual sides, cut it freely for your customized demand, tear off the dual-side protective film and paste it. The soft and compressible upgraded thermal material allows 30-40% compression rate which is a perfect substitute for traditional radiator compound grease.
Reliable & Safe — High temperature resistance, works perfectly in -40℃-200℃. Non-toxic, odorless, anti-corrosion, anti-static, flame-retardant, compression, good insulation. The breakdown voltage of the silicone thermal pad above 1mm can reach 10KV, contacting with any electronic element will not damage it. ROHS certificated & environment friendly.
Wide Application — Suitable for electronics PCB surface, controller, CPU, GPU, radiator, power supply, VAG card, hard disk, computer host, notebook computer, memory stick, 3080/3090 graphics card, game console, car electrical appliances, microwave oven, TV, set-top box DC -DC, PDP LED IC SMD DIP and other cooling modules
100% Satisfaction — Feel free to contact us if you have any question or mass order demand, we care customers and make sure 100% satisfaction customer service reply within 24 hours.

Customers say

Customers find the thermal pad’s cooling performance excellent, with one mentioning its thermal conductivity of 13W/mK, and many noting it works better than stock alternatives. The product receives positive feedback for its performance. However, opinions on value for money are mixed, with some finding it reasonably priced while others consider it overpriced.

13 reviews for Aairhut Thermal Pads 13W/mK, 85 x 45 x 0.5mm Silicone Cooling Heatsink Thermal Pad GPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop/CPU/LED

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Amazon Customer

    Did the job just fine
    Had trouble finding thermal pads in stores near me so I decided to go with my gut and buy these as the reviews were good. Came next day without an issue.I applied these on my laptop’s VRM and VRAM alongside some PTM for my GPU and CPU and I was quite happy with the product. Were easy to cut into shape and stick onto the components.

    Helpful(0) Unhelpful(0)You have already voted this
  2. UA

    Excellent Cooling Thermal Pads!
    These Aairhut Thermal Pads are absolutely fantastic! I needed a solution for cooling various components in my PC build, and these pads did not disappoint. With a thermal conductivity of 13W/mK, they work incredibly well in transferring heat from my GPU and CPU. The cooling performance is outstanding, and I noticed a significant drop in temperatures after applying these pads.The pads are easy to use—just peel off the protective films, and they stick perfectly to the surfaces I needed to cool. The fact that they are slightly sticky on both sides makes them incredibly convenient, and I love how I can easily cut them to size for different applications.What’s also great is their reliability. They can withstand a wide range of temperatures (-40℃ to 200℃), so I’m confident they’ll last in any electronic setup. They are non-toxic, anti-static, and flame-retardant, adding an extra layer of safety when handling sensitive components.Overall, these thermal pads are a perfect substitute for traditional thermal paste, and I highly recommend them to anyone looking for efficient, easy-to-use cooling solutions for their electronics.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Nawaz

    Used on Xbox One X
    My Xbox One X was starting to sound like a jet. I opened it and gave it a clean with a brush. I already had some Arctic MX2 lying around. I that used that along with this. It was just enough to do the console. Even after hours of gameplay, the fan barely ramps up so I’m guessing these and the Arctic thermal paste are excellent. 5*

    Helpful(0) Unhelpful(0)You have already voted this
  4. Arthur

    stiff
    quite good, but expensive

    Helpful(0) Unhelpful(0)You have already voted this
  5. Amazon Customer

    does what it says
    good value for money

    Helpful(0) Unhelpful(0)You have already voted this
  6. Ion Feraru

    Useful,performance,quality product
    I installed on my 3080 7 month ago,good functionality,good performance,price is reasonable

    Helpful(0) Unhelpful(0)You have already voted this
  7. Jason Wagner

    Neat alternative to paste but very expensive comparatively
    Not awful, feels very expensive for what it is, neater than paste but certainly at a cost, will have to see how long it holds up over time!

    Helpful(0) Unhelpful(0)You have already voted this
  8. Lonewolf69

    Keeps your console cool
    Best pads to replace your old hest pads on your console or laptop

    Helpful(0) Unhelpful(0)You have already voted this
  9. Carsen

    For anyone repadding a 3080Ti FE, I would recommend these pads. These pads are exactly the same to Gelid extremes except you get 5mm more and they seem of higher quality. I used 1.5mm for the die and VRAM side and 2mm for the back plate. One large 2mm pack is enough for the back plate and one small 1.5mm pack is enough for the back plate. I tried 2mm on the die and VRAM but it prevented proper contact and temperatures were high. My GPU was manufactured on 05-02-2021, so its important to check when yours was made so you get the correct sizes. Overall, 1.5mm and 2.0mm should be it!

    Helpful(0) Unhelpful(0)You have already voted this
  10. オナマス

    サーマルパッドの購入事態初めてなので、比較対象が無いが、良く冷えて良い感じ。使用用途はRTX7900XTXの各部分のサーマルパッド張替えでした。

    Helpful(0) Unhelpful(0)You have already voted this
  11. ANTONIO

    Necesaria,ya me urgía para mi consola

    Helpful(0) Unhelpful(0)You have already voted this
  12. MB

    Benutzte dieses Pad für eine 7900xtx Hellhound.Bei dieser Karte wurden vom Hersteller keine Wärmeleidpads unter der backplate eingesetzt. Wahrscheinlich aus Kostengründen mit fatalen Folgen für den VRAM.Es befanden sich nur Wärmeleidpads von 1,5 mm am Kühler der Karte .Nachdem ich diese 1,5 mm mit Arctic P3 tauschte, platzierte ich diese 2,5 mm Pads vonAairhut direkt unter der Backplate.Ergebnis: VRAM ohne Aairhut 2,5 mm Pads bei 70 % Lüftereinstellung unter Last : 100 ‘C – 102 ‘C.Ergebnis mit Aairhut 2,5 mm Pads : 78’C – 82 ‘Cunter Last bei 56 % Lüftereinstellungen.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Nick Capko

    Came falling apart crumbled apart before i even took the sticky part off

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Aairhut Thermal Pads 13W/mK, 85 x 45 x 0.5mm Silicone Cooling Heatsink Thermal Pad GPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop/CPU/LED
    Aairhut Thermal Pads 13W/mK, 85 x 45 x 0.5mm Silicone Cooling Heatsink Thermal Pad GPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop/CPU/LED

    £6.59

    buysmarthq.com
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart