Adamson B10 Bed Cooling System – Twin 75” L x 39” W – New-100% Cotton Mattress Cooling Bed Pad for Night Sweats – Water Bed Cooler Ideal for Hot Sleepers – Improved Mattress Cooling System
£169.97
Price: £169.97
(as of Jun 04, 2025 09:37:23 UTC – Details)
From the brand
KEEP YOUR BODY COOL: Thanks to an ingenious system using the principle of evaporative cooling, this bed cooler will help you sleep like a baby on hot summer nights. It will be your best companion to reduce hot flashes, night sweats and other sleep troubles related to menopause or pregnancy.
SAFE AND EFFECTIVE: No wires or electromagnetic waves here, the B10 uses a chilled water flow circulating through high-grade soft silicone tubes to cool down the mattress pad (by 7 to 12 °F) in the safest and most effective way.
SOFT AND COMFORTABLE: Made of 100% cotton, the twin size mattress pad of the B10 is pleasantly soft so you can enjoy maximum comfort for a good night of sleep. If necessary, you can even add an extra topper.
PAY LESS AND HELP THE ENVIRONMENT: This mattress cooling system uses only 8 Wh compared to 800 Wh for a standard AC which makes it really more energy efficient. It’s a big saving on your electricity bill and a nice way to preserve the earth!
INSTRUCTION MANUAL & SOLID ASSURANCE: Invest in quality sleep with the B10 bed cooler. Before setting up your B10 bed cooler, we recommend reading the instruction manual thoroughly. The manual provides clear instructions on how to use and maintain the bed cooler for long-term optimal performance. Should any issues arise, our 24/7 customer service is here to assist you. Your comfort is our priority.
6 reviews for Adamson B10 Bed Cooling System – Twin 75” L x 39” W – New-100% Cotton Mattress Cooling Bed Pad for Night Sweats – Water Bed Cooler Ideal for Hot Sleepers – Improved Mattress Cooling System
Add a review
Related Products
£169.97
Amazon Customer –
Much too noisy
The cooling works well and its pretty easy to setup, but its designed to improve sleep and it sadly does the opposite as its just too loud even on the quietest setting and even moved as far from the bed as possible. Build quality of the unit is also quite low considering the price.
SA –
Mine leaked as soon as I lied down on the mattress. I think the filter’s washer is defective.Update:Got a full refund from the seller, ordered a new unit and it’s great. Gets quite cold for me if I sleep directly on it and does not get cold enough if I add my mattress topper. I would suggest others to find a very thin mattress topper to be the perfect fit unless you don’t get too cold. But by itself product works as advertised.
Carlin –
Environment & Setup:I live in Sydney, Australia, which I consider a dry environment. Iâve used this product for about two weeks on the highest setting. The device is placed above the mattress topper, as recommended.Performance:The mattress topper doesnât show any noticeable change in temperature, even though water appears to be pumping through it. While the mattress topper isnât uncomfortable, the device doesnât cool it as claimed. Its only noticeable output is blowing cool air from the unit.Water Filling:Filling the device with water takes about 30-45 seconds.Final Thoughts:I typically avoid leaving negative reviews, but this product doesnât live up to its claims. I purchased it primarily for the mattress topper but am disappointed with the results. I plan to develop my own DIY cooling solution instead.
SFM –
Before I got this Adamson bed cooling system, I set my AC at 18°C and would wake up during the night because my back would be hot. This cooling system now balances the cooling on my body as it cools my back.When you set it up for the first time, you have to slowly fill it with about 2.5L of clean water. It consumes water whenever it’s turned on, so after about 8-9 hours of sleep with it turned on, about 1 litre of water will have evaporated. I fill it until below the Max line on the device on a daily basis.
Clive Ong –
Have been using it for the last 2 weeks under a topper and all i can say, its not well built.Refilling the tank could lead to leakage (not even due to over pouring) but the stopper beneath is just not enough to stop leaking. i’ve tried multiple way to refill the water tank and even tried replacing the stopper but non of it worked.Now i’ve a towel permanently beneath it and require to change the towel every use.Cooling function does work, just that water refilling (2.5L) requires to be done everyday for a 8 hour use, which is troublesome.Definitely expected a better equipment for the price paid.
HappyBerry –
This is like the cool side of the pillow all the time.Even on its lowest setting (p4) is enough to stay cool and comfortable throughout the night.I usually run a portable air conditioner that blows cold air over me but still get sweaty when lying down.After running this on high, it was too cold, and the lowest setting is enough for me to be able to wear flannel pajamas and only have a fan on (not a/c running) which saves money on running the compressor vs running the tiny little water pump in this device.Overall win and I foresee this type of cooling to be eventually built into mattresses instead of an add-on.for now, I’m grateful to have one, and it’s been a few weeks of fantastic, comfortable sleeping.Not only can I wear winter pajamas (which are more comfy) but a blanket too.Once you run one of these, you won’t be able to not have one…it’s probably the best thing I’ve found in years for quality of life.things that could use improvements:1. water reservoir is about 7 cups, it will last 8+ hours on low but why does it evaporate at all?1a> Why doesn’t it use coolant like a car and have a sealed system that doesn’t need to be replenished?2. Mine is new, and to keep it clean, I add a tiny bit of white vinegar to the water each day…2a> this should be in the manual… note: never mix vinegar with bleach, if you use either, never switch.3. The reservoir lid is snug and snaps in place too securely.When it opens, it’s a skinny slot that gets water, and the lid snaps back in place but can be lost, or feels like it can easily be broken.3a> This is a tank that needs daily maintenence…why isn’t there an easier way to accomplish this, or have a lid with a funnel to prevent any spills….I personally added a few strips of tape to the lid, so it can slide back and not fall but why isn’t this an easier task?4. at least an optional double hose extender… it’s okay for me now but I would pay extra to have this further away from my bed…again, I love this device, these are merely things to consider.5. the cooling pad slides around a bit…not a ton, but enough to notice.5a> add a bit of rubber to the bottom of the pad.5b> work out a deal with a waterproof sheet company to incorporate a few bits of velcro to their sheets and you can add the opposite velcro to the pad and make a perfect combination where the pad stays exactly where it’s supposed to be.I can sew this on myself, but again, I would pay a bit extra for it to be done profesionally… the current straps work but could be so much better with minimal costs.6. This cools, but could there be a heater mode where it warms the water circulation ?Overall:This product is one of those life changing devices and I’m so grateful it’s been invented, produced, and marketed in such a small and efficient little package that provides much needed relief.Highly recommended for anyone who gets hot.