Aqara Smart Wall Switch H1 (No Neutral, Single Rocker), Requires Zigbee AQARA HUB, Remote Control Light Switch for Smart Home, Compatible with Amazon Alexa, Apple HomeKit, Google Assistant, IFTTT

Easy to install, works like a normal switch, but is smart
Easy to install, works quickly via voice control, but more importantly works as a normal switch for everyone else. Wish I’d bought these earlier rather than all the smart bulbs..

Good Quality Work As intended but connection issues do happen a lot
These light switches are very good in that they are no neutral witch is a rarity and that they integrate into home assistant & Apple HomeKit for offline use BIG PLUS no external servers required, They only issue is that they from time to time become unresponsive due to the Zigbee network losing connection and then the Switches are not found again until you manually re-add them if you would like these lights you will need an existing strong back bone for Zigbee before installation another big let down and contributor for the signal loss is that you can’t use these Switches as a Zigbee Router they are only useable as an end Device witch weakens your Zigbee network and limits devices that can be added to your Zigbee Network More info on how a Zigbee Networks work can be found online

Looks Fantastic – Works in Home Assistant (Read for Details)
UPDATE: Jan 2025 (~4 months) the switch is failing after 4 months in use, it becomes unavailable and I have to paid it to my ZigBee network again and it lasts a few hours and drops off again. It’s not a signal issue, the ZigBee dongle for Home Assistant is 6 feet away, direct line is sight. I’m going to see if I can contact aqara about it and will update on the result. Lowering score to 3 stars from 4 originally.I bought this because I needed a light switch to control my Aqara T1M without turning the power on and off. It has a really useful feature called “Wireless mode”, which turns the relay on, meaning your smart light is always powered, and when you toggle the button on the switch (the whole face is a button, not a rocker, just a button), it is detected using your smart home gateway and you can use it in automations.I first paired it up to an Aqara E1 and updated the firmware, which is something I like to do with any devices I get, then disconnected it and paired it with Home Assistant using ZHA and SkyConnect Zigbee dongle.A couple of Zigbee management commands later and it was in wireless mode and I could use press, double press and press-and-hold to perform various actions in automations.Out of the box it is _not_ in wireless mode, so if you just want to control a normal light bulb (not a smart light) by toggling the power on and off, but also have the option to control it with your smart home, this is already configured for you out of the box.To switch to wireless mode in Home Assistant, you’ll need to “Manage Zigbee Device” and find the OppleSwitchCluster, if you read the value with the Read button, it’ll be something like “OppleOperationMode.Coupled”; Home Assistant doesn’t let you modify that to say “Decoupled” so simply use 0 or 1 in the value box for coupled/decoupled. Coupling is referring to whether the switch/button is coupled with the relay or operating in “Wireless mode”.Just to clear up the physical hardware; this version has 2 holes on the back, for light switches with no-neural, I just took the two out of my old switch, screwed in the back-plate and the front plate/switch clips on, and has some little pins on the back to connect to the smarts (it’d be nice if Aqara offered the face plates separately if you changed decor and wanted to go from dark grey to white or vice-versa), the face plate is a sort of springy button, attached at the top, with a sliver of plastic removed under the bottom 4/5 of the plate so when you press it, bends and presses the switch, it’s not a rocker or toggle on/off, it’s press-press. There is a small LED which is blue in operation mode, and can be red, or flashing from what I’ve seen when it’s pairing, it’s quite dim so it won’t bother you if it’s in a bedroom, in my opinion, but it can also be disabled in software if it does bother you.

Terrific switch unit.
Shame these aren’t made for two way circuits. Absolutely fantastic switch.

Buen interruptor para ir con su hub, funciona fantásticamente en conjunto con los diferentes dispositivos tanto de Amazon como de google

Funkade kanon att installera och använda, kopplas det via aqara hub och appen funkar den i Google Home, ansluts den via Xiaomi home appen så funkar den i te i Google Home.