QSFPTEK 10G SFP+ Module, Mini Gbic 10GBASE-LR LC Single-Mode Transceiver for HP J9151A, Netgear, D-Link, Supermicro, Mikrotik (1310nm, 10km, with DDM)
£10.99
Price: £10.99
(as of Jun 25, 2025 05:58:38 UTC – Details)
Product Description
10GBASE-LR SFP+ transceiver module compatible for HP J9151A
Data Rate: 10Gb/sWave Length: 1310nmReach: 10kmDDM/DOM: YesFiber Type: Single-mode fiber (SMF)Tx Power(dBm): -6.5 ~ -0.5Rx Sens.(dBm): ＜ -14.4Temperature: 0℃ ~ +70℃Interface: LC duplex
Support on a wide range of HP equipment, such as:
HPE 2920HPE 1950HPE 3800HPE 3500 ylHPE 5400RHPE 2530
Kindly Note
Please make sure your device model before purchasing. Gigabit modules can only be used on Gigabit ports, and 10G modules can only be used on 10G sfp+ ports.
Superior DDM Function
DDM (Digital Diagnostics Monitoring) allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems.
Widely Used
Widely used in fiber switches, routers, NIC, server or other fiber optic equipment with 10G SFP+ interface. We offer many compatible options, please confirm the compatibility of your device model.
10G SFP+ Modules
10GBase-SR SFP+ module, 850nm wavelength, TX Power : -6.5 ~ -0.5 dBm, RX Sens: < -11.1 dBm, up to 300M.
10GBase-LR SFP+ module, 1310nm wavelength, TX Power : -6.5 ~ -0.5 dBm, RX Sens: < -14.4 dBm, up to 10KM.
10GBase-T SFP+ RJ-45 Copper module, for CAT6A/CAT7 cable, up to 30m.
Easy to Use and Durable
Easy installation, plug and play, Supports hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. High-quality metal material of housing, ensuring long life of repeated repeatedly plug and durable.
Wide range of products, Gobal sales
We have full line of optical modules: GBIC, SFP, SFP BIDI, DWDM SFP, CWDM SFP, Copper SFP, 10G XFP, 10G SFP+, CWDM SFP+, 40G Transceiver, 100G Transceiver, as well as fiber optic transceivers etc. Gobal sales.
Compatible for HP J9151A, other Open Switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports.
10GBASE-LR SFP+ Module: 10Gb/s data rate, Single-Mode, duplex LC connector, 1310nm wavelength, the transmission distance up to 10km, working temperature: 0℃ ~ 70℃, Tx Power(dBm): -6.5 ~ -0.5, Rx Sens.(dBm): ＜ -14.4.
Support DDM: DDM (Digital Diagnostics Monitoring) allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems.
Easy to use: Easy installation, plug and play, Supports hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. High-quality metal material of housing, ensuring long life of repeated repeatedly plug and durable.
We have many different compatible options, please confirm your switch model before buying. We have full line of optical modules: GBIC, SFP, SFP BIDI, DWDM SFP, CWDM SFP, Copper SFP, 10G XFP, 10G SFP+, CWDM SFP+, 40G Transceiver, 100G Transceiver, as well as fiber optic transceivers etc.
Customers say
Customers find the SFP+ transceiver performs exactly to spec and works well with Unifi devices, particularly the USW-24-Pro model. They appreciate its ease of use and consider it good value for money. However, the product receives mixed feedback regarding durability, with one customer reporting it lasted only four months before malfunctioning.
13 reviews for QSFPTEK 10G SFP+ Module, Mini Gbic 10GBASE-LR LC Single-Mode Transceiver for HP J9151A, Netgear, D-Link, Supermicro, Mikrotik (1310nm, 10km, with DDM)
Add a review
Related Products
£10.99
James K –
Compatible with UniFi at 2.5G
Compatible with UniFi. Runs perfectly stable at 2.5Gbe, uplinking between a UniFi Aggregation switch and a Flex Mini 2.5G.
Bjoern Klaus Sassmannshausen –
It works with my cheap chinese router
Works fine for me the price is amazing!
Jason T –
SFP for unifi
works great on UNIFI
TSUK79 –
Works well but gets hot
I’d read a lot about how hot these transceivers can get, but was surprised at how quickly it heated up. I am using this to connect RJ45 into a QNAP which only has SFP+ ports. Works fine for speed and I’ve not had any stability issues, but I’m also not transferring loads of data so the heat was surprising. But considering what this is doing at an electronics level, it’s understandable. I’ll be researching options or ideas to try find cooler options or might just direct a fan to actively cool it.
MrRhubarb –
Does what it says
I bought this to connect to a TP-Link SX3008F switch so I could setup the unit.Whilst the switch did need manually forcing into 1Gbit/s mode I can’t blame this module for that and once connected it worked exactly as expected without any issues
Billy –
Failed for Unifi UX7 to US24
I tried to connect my Unifi UX7 Rotuer/Controller lan port to my SFP port on my Unifi US24 switch but started ‘flapping’ so fixed both ports to 1Gbps and although stopped ‘flapping’ still never connected to my switch. I can only put it down to incompatibility with the Unifi UX7. Will send back.
Mark –
Good value SFP module – 10Gbps over copper
Good value SFP module, works well with Unifi hardware eg. UDM Pro and allows 2.5Gbps that Ubiquiti’s own module didn’t support. Maintains a 10Gbps connection over short cat 5 cable runs too.
Greg K –
Lasted four months before malfunctioning
Bought this in January 2025, worked until a week ago (early May). It’s always run hot but now causes intermittent data transfer after being installed and used for a few minutes. I switched it into another SFP port but it exhibits the same behaviour. This was the first time trying a QSFPTEK module, all my others are ipolex. Those have worked fine for years now. This QSFPTEK module lasted 4 months.Update: QSFPTEK contacted me after reading this review and asked for more information on my module (S/N, photo etc) and the switch it was installed in. They sent me a replacement module free-of-charge (that I’ve not yet used) and I am returning the faulty module to them for investigation. Customer support 5* – hopefully my device was a dodgy one.I’m running with an ipolex module for the last month without issue, I’ll update my review if I switch over to the QSFPTEK and have some long term testing to report.
BatEnnoying –
A la fois dans un mikrotik hex et dans un Netgear GS110TP et dans les deux cas il fait ce qui est demandé.Utilisé comme uplink sur les deux liens, sur un lien 10/100/1000.
Dennis –
Dieser SFP funktioniert genauso wie angegeben, der Switch glaube es sei ein 10G sfp und nach vorn habe ich ein endgerät mit 2,5G autoneg angeschlossen.Habe Last Tests gemacht und alles klappt einwandfrei. Es gehen 2,5G durch und es gibt auch kein Stottern oà aks Flaschenhals.Funktioniert einfach genau so wie man es erwartet.Habe bereits 2x gekauft!
Lorenzo –
Questo modulo SFP Ethernet è stato una soluzione perfetta per sfruttare finalmente la porta Ethernet da 2,5 gigabyte della mia rete. Grazie a questo dispositivo, sono riuscito a ottimizzare la connessione cablata e sfruttare appieno la fibra da 2,5 gigabyte. La qualità e la velocità della connessione sono decisamente migliorate, consentendomi di ottenere performance superiori rispetto al passato. Consiglio vivamente questo prodotto a chiunque desideri massimizzare la propria connessione Internet su rete cablata.
PdB –
Works (at 2.5G at the moment) against FreeBSD 13.4 – DMA/offloading efficient enough to fully saturate on a low end cpu.
Mr: P –
Fungerar enbbart som 10G SFP men tar både 10G och 1G på kopparsidan RJ45Passar i flera stora fabrikat, och även i Microtik prylar.