sb Components Raspberry Pi Camera Case Transparent Protective Case Cover For Raspberry Pi Camera | Compatiable With Camera Module 1, 2 and 3 (Black)
£2.90
Price: £2.90
(as of Jun 08, 2025 18:39:05 UTC – Details)
From the brand
SB Components is a leading research and development company in the world. Based in the UK, we specialize in innovative technologies to provide a vast offering of Hardware and Software solutions along with incredible services in customization.
Our enthusiasm for embedded hardware means that we only offer the highest-quality products to our customers, which are guaranteed to satisfy their needs and keep them satisfied.
Shop Our Products!
This Camera Case is a protective case specifically designed for the Raspberry Pi Camera.
The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi Camera. Holds the Raspberry Pi Camera firmly in place.
It provides tough protection for the Raspberry Pi Camera while providing access to all the connectors.
Wall mountable case and The case is made of semi-transparent ABS material.
This Camera Case Cover is compatiable with Raspberry Pi camera module 1,2 and 3.
Customers say
Customers find the camera case protects the unit well and serves its purpose effectively. However, the case has several issues: it doesn’t fit properly, is flimsy, and the lens doesn’t align properly. Moreover, customers report that the case doesn’t snap shut and consider it a waste of money.
13 reviews for sb Components Raspberry Pi Camera Case Transparent Protective Case Cover For Raspberry Pi Camera | Compatiable With Camera Module 1, 2 and 3 (Black)
Add a review
Related Products
£2.90
tony mead –
Good product
Great item
Amazon Customer –
Does not fit Raspberry Pi Camera Module V2, actually broke my camera
As others have already stated here, this camera case does not fit the Raspberry Pi Camera Module V2, and likely was designed for an older model. The four pins fit in the module however the lens does not align properly with the hole.I could not completely close the case with my V2 Camera Module inside, and by trying actually broke my camera module, i’m assuming by one of the plastic prongs damaging my camera module.Was drawn in by the cheap price tag but ended up with a broken Camera Module, would absolutely avoid if you’re looking for a case for your RPI V2 Camera Module.
D. A. Robinson –
and the case needed a tiny amount of adjustment to be useful. However post ‘surgery’ the case does what I …
Not worth 5 * The camera module didn’t quite fit, and the case needed a tiny amount of adjustment to be useful. However post ‘surgery’ the case does what I expected of it and I am relatively happy with it
Daniel Pell –
The lesser of two evils.
There are some terrible Raspberry Pi camera cases on Amazon (judging by the reviews). After researching both extensively, I decided to bite the bullet and purchase one – the camera is very sensitive to static and I needed something to protect it. This camera case is definitely the lesser of two evils in regards to quality. However, there is quite a BIG flaw: the camera doesn’t properly fit into the hole it’s meant to look out of. I have attached a picture of this issue.Pros:- Firm case that protects the camera- Small and comes with mounting screwsCons- Camera doesn’t fit properly! A massive con.
Dead Jester –
Not great
The camera cover consists of two parts which are supposed to clip together. The fit is not very positive and ii is very easy for the two pieces to fall apart again.I had great problems getting the camera to work on the Pi. I assembled everything and got a “camera not installed” error. Disassembled – tested : working. reassembled, tested : not detected (wash, rinse, repeat) and this involved dismantling a pibow case each time. It turns out that when clipping the camera into this case it was shifting a tiny connector just above the lens and thus disabling the camera. Once I knew this I was very careful putting the camera in. I didn’t clip it closed but instead the bits are held together with selotape.All in – a pretty poor product even for the price.
Trevor Coombs –
Excellent bit of kit
Excellent bit of kit. I have the clear version fitted with a picam and I’ve modified this black one to hold a motion sensor. I shall get another black one for a picam noir.
Amazon Customer –
Completely unsuitable for the Pi cameras!
This case does not fit either the v1. 3 or the v2.1 Pi camera, the lens hole is too high to align with the camera lens.
Amazon Customer –
Perfect for the job intended
Neat size, ease of assembly
mana –
ã«ã¡ã©ã¢ã¸ã¥ã¼ã«ã®ã±ã¼ã¹ãç¡ãã¨ã¹ã¿ã³ãã§ããªãã®ã§ä»æ¹ãªãè²·ãã¾ãããå°ããé«ãã®ã§çµæ§è¿·ãã¾ããããè²·ã£ã¦å¤§æ£è§£ã§ãããè¦ãç®ãã·ã³ãã«ã§ããã¸è¦ããã§ã»ããå¯è½ãã«ã¡ã©ã©ã³ãã®èµ¤ãç¹ç¯ããã½ã£ã¡ç©´ã空ãã¦ãã¦è¦ããããã«ãªã£ã¦ãã¾ããå°ãªã©ã«åãä»ããããããã«ããã¸ãå梱ããã¦ãã¾ãã
Gideon –
Does not fit v2.1 camera at all, camera does not align with slots provided.
Amazon Customer –
The Camera fits snuggly into this case as if they were made for each other.It is dainty so handle with care.
Pierina Lopez –
No encaja con la camara, la camara se desconecta cuando inteno ponerla en la carcasa.
Amazon Customer –
The camera fits in perfectly, and easy to mount.