LED Dimmer Switch for Dimmable LED/Halogen/Incandescent Lights Trailing Edge Dimmer Switches Rotary Push On/Off, 1 Gang, 1Way/2 Way, 3-100 Watts
£14.99
Price: ยฃ14.99
(as of Nov 27, 2025 07:22:58 UTC – Details)
From the brand
All from Luminaire UK
GU10 LED Bulb
GU5.3 LED & E27 LED
E14 Dimmable LED Bulb
Halogen Bulb (GU10 & GU5.3)
Trailing edge dimmer switch for led lights
Minimum mounting box depth 25mm
Compatible with a majority of dimmable LED, halogen and incandescent lights in the market
With a lower minimum LED load (3 Watts) and Overload protection
Max. Load (LED) : 100 Watts
Customers say
Customers find the dimmer switch works well with LED light bulbs and operates effectively over a wide range. The product receives positive feedback for its quality, ease of installation, and value for money, with customers noting it’s easy to wire and fits standard back boxes. While some customers report no flicker, others mention the switch flickers badly in the middle.
8 reviews for LED Dimmer Switch for Dimmable LED/Halogen/Incandescent Lights Trailing Edge Dimmer Switches Rotary Push On/Off, 1 Gang, 1Way/2 Way, 3-100 Watts
Add a review
Related Products
£14.99
Johnny –
Great double dimmer switch
I replaced my old halogen bulbs for new dimmable LED bulbs, so purchased this double dimmer switch to go with them. It was simple to fit. Functions perfectly from full brightness to practically off with no flickering at all. Reasonable quality for the price. Both knobs feel smooth and click on/off with a quality feel. Absolutely perfect for good quality dimmable LED bulbs.
Amazon Customer –
Works well, may be too big for standard backbox
Works well and easy to install. Found it to be slightly too big for standard backbox but easily solved by flattening one of the spare screw tabs.
Damien Thorne –
Excellent product and quality
Excellent product and quality. Great price, service and delivery. Would buy again. Works well for LEDs
Amazon Customer –
Works great with LED bulbs
Excellent dimmer switch. I changed out some old halogen R7s bulbs from a couple of uplighters… the original dimmer switches would not turn the LED bulbs off completely (very dull glow at off position) and flickered at full brightness. This dimmer switch does exactly what it promises – smooth operation, no buzzing and no flicker. As others have said, the switch does need a deeper than usual back box. I changed mine for a 47mm depth box and there was plenty of room to accommodate the bulk of the switch and all wiring etc., no bother at all.
Mr. K. P. Kington –
Great value for money.
At 1/3rd the price of similar item from most DIY stores, this is fantastic value for money. easily fits to a standard switch back box. easy to wire in. No issues with this items manufacture or delivery, definitely recommendedone note of caution, note on paper the cables positioning in your old switch before undoing them, I didn’t and got interrupted after taking off the old switch and connected to the new one in wrong order, took another 2 attempts to get the correct sequence. if its a single light switch for one light, that might not matter, but where you have 2 different switches, you really need them wired the correct way round.
Ovidiu –
Very poor quality faceplate
The switch/dimmer itself works fine, no complaints there. The face plate however is of very poor quality. It has 2 earthing connectors attached to the back, poorly soldered right next to where the fixing screws go. Since the whole face plate is metal, it doesn’t matter which of the two you use. As I was screwing in the earthing wire to one of them, the solder broke off and it just came off the faceplate with barely any force applied. I thought that maybe it was just a one-off defect, so I tried the other one. Yet, the same thing happened again with the other one. In the end I had to solder one of them back to the faceplate myself and this time it didn’t come off. Eventually, I had it all installed but then I realised that the faceplate got some very fine scratches just by handing and installing it, even though I had been extra careful not to scratch it. Very poor quality indeed.
C. JONES –
Caused a short circuit and blew the fuse in the lighting circuit – but excellent customer service
I was initially very pleased with this dimmer – it worked very well with LED light bulbs – but after less than two months of use, there was a bang, and all the lights in the house went out. The fuse was replaced, but it blew again immediately. After replacing this dimmer with a Varilight V-Pro dimmer switch, everything works fine again. I’ve been using Varilight dimmers for years with no issues, and only bought this brand, as the model number I wanted wasn’t available at the time. I would not recommend this product.Update – soon after I posted my review the company – Belns Melns Store – contacted me, apologising profusely for my negative experience, and offering me a refund for the dimmer switch. They also sent me a complimentary pack of LED light bulbs to try, and I’m happy to say they perform as expected. Would I buy this dimmer switch again. No. But I cannot fault the company for their customer service, which they clearly take very seriously. Thank you Ivy for all of your help.
Charles Atkinson –
Great but not tightly assembled
One star off because the switch mechanisms were not tight in the fascia plate; they rotated when the dimmer was being installed. Found the retaining nuts not tight. Tried tightening. That worked for one but the thread slipped on the second one before it was tight enough to prevent rotation. Fixed (ha!) with Evo Stick contact adhesive.When used with TEKLEDรยฎ A60 DIMMABLE B22 12W 2700K 2-Pack Warm White, ASIN B08SZB1LXQ, there was no noise from the dimmer switch, no flicker from the bulbs and almost the entire rotational range of the dimmer knobs changed brightness (as opposed to rotation through top and bottom of the range not changing brightness)